Shopping CartLoading... AccountLoading... |
Vysa-Cable™ Classic Underfloor Heating Cable Kits rated 10W/m are ideal for
refurbishment projects in existing dwellings or in new-build extension projects,
either as direct floor heating or as floor storage heating.
There is no need to remove existing ceramic floor tiles - you can install the Vysa-Cable™ Classic heating cables directly on top of the existing tiles and then tile over them as normal.
|
|
Vysa-Cable™Classic underfloor heating cables can be installed within the thickness of the tile adhesives and therefore adds no significant height to the floor level.
Consequently, there should be no requirement to reduce door heights, raise skirting boards etc.
Vysa-Cable™Classic underfloor heating cable is versatile because you can choose a cable spacing to provide the appropriate power rating and, they suit rooms with irregular floor areas where a heating mat might be awkward to lay.
The popular Vysa-Cable™Classic underfloor heating Cable Kits contain everything that a DIY enthusiast would need in one carton.
1. Vysa-Cable™Classic underfloor heating cable
2. Vysa-Therm™3000 thermostat
3. Floor temperature sensor
4. Conduit for the floor sensor
5. Vysa-Bond™PVA floor primer
6. Paint roller to apply primer
7. Vysa-Bond™adhesive tape
Naturally, Vysa-Cable™ Classic underfloor heating cables are a twin conductor design with a single 3 metre long 'cold tail' connections lead (only one connection cable to the thermostat). |
|
Cable Kits - Vysa-Cable
|
